Errors

Boiler type PureFire PF-1000

Error code A04

Cause:

Internal error gas valve relay.

- Gas valve relay is not reacting correctly to software commands.

Solution:

- If persistent locking errors, A04 occur, systematically disconnect all wires not supplied by the factory with the exception of the power supply (CH T’Stat, DHW T’Stat, LWCO, Pumps, etc.). If the error code goes away, determine which circuit may be introducing electrical noise or feedback.
- If the error persists after all these wires are disconnected, contact your PB Heat representative.
- If this error occurs after replacing a control, contact your PB Heat representative.