Störungen / Fehler

• - wähle Typ -
• Elite EL-110
• Elite EL-150
• Elite EL-220
• Elite EL-299
• Elite EL-301
• Elite EL-399
• Elite EL-80
• Elite Fire Tube Combi (floor Mount)
• Elite Fire Tube Combi (wall Mount) EFTC-140W
• Elite FT EFT-110
• Elite FT EFT-155
• Elite FT EFT-199
• Elite FT EFT-285
• Elite FT EFT-399
• Elite FT EFT-55
• Elite FT EFT-80
• Elite Premier EP-110
• Elite Premier EP-150
• Elite Premier EP-220
• Elite Premier EP-299
• Elite Premier EP-301
• Elite premier EP-399
• Elite Premier EP-80
• Enduro TI ETI-1000
• Enduro TI ETI-750
• Hydra Smart RT-199
• Hydra Smart RTC-199
• Mod con 1000
• Mod con 1700
• Mod con 300
• Mod con 500
• Mod Con 500 After december 2012
• Mod con 850
• Mod Con 850 After december 2012
• Phoenix PH-76-50
• Phoenix PH-76-60
• Phoenix PH-76-80
• Phoenix PH100
• Phoenix PH100-119
• Phoenix PH100-55
• Phoenix PH100-80
• Phoenix PH130
• Phoenix PH130-119
• Phoenix PH130-55
• Phoenix PH130-55SA
• Phoenix PH130-80
• Phoenix PH160
• Phoenix PH160-119
• Phoenix PH160-55
• Phoenix PH160-80
• Phoenix PH199
• Phoenix PH199-119
• Phoenix PH199-55
• Phoenix PH199-55SA
• Phoenix PH199-80
• Phoenix PHM130-100
• Phoenix PHM130-80
• Phoenix PHM199-100
• Phoenix PHM199-80
• Pionier PHR 130-55C
• Pionier PHR 160-55C
• Pionier PHR 199-55C
• Pionier PHR100-55
• Pionier PHR130-55
• Pionier PHR160-55
• Pionier PHR199-55
• UFT-100W
• UFT-120W
• UFT-140W
• UFT-80W

• - wähle Code -
• E07
• E13
• E34
• E39
• E53
• E64
• F01
• F02
• F03
• F05
• F07
• F08
• F09
• F12
• F14
• F21
• F31
• F35
• F82

Kessel Typ Phoenix PH-76-50

Störungscode F09

Ursach:

Valve Feedback Error

LÖsung:

- Manually reset the water heater.
- Observe water heater operation. If fault code occurs again, reset the water heater and:
- When water heater attempts to fire, check voltage at the gas valve connector. If there is voltage, but no gas pressure on the outlet side of the valve, the valve is stuck closed. Replace the gas valve.
- If there is no voltage at the ignition phase, replace the control board.