Störungen / Fehler

• - wähle Typ -
• Combi 160
• Pinnacle PO-70
• Pinnacle PO-70A
• Pinnacle PO-84
• Pinnacle PO-84A
• PureFire PF-1000
• PureFire PF-110
• PureFire PF-140
• PureFire PF-1500
• PureFire PF-200
• PureFire PF-210
• PureFire PF-399
• PureFire PF-460
• PureFire PF-50
• PureFire PF-80
• PureFire PF-850
• PureFire PFW-200
• PureFire PFW-399

• - wähle Code -
• #W00
• #W01
• #W02
• #W03
• #W04
• A01
• A02
• A03
• A04
• A05
• A09
• A10
• A12
• A13
• A14
• A15
• A16
• A18
• A19
• A20
• A23
• A24
• A32
• A33
• A50
• E01
• E02
• E04
• E05
• E11
• E12
• E13
• E14
• E19
• E20
• E21
• E22
• E23
• E24
• E26
• E30
• E31
• E32
• E42
• E45
• E46
• E47
• E48
• E51

Kessel Typ PureFire PF-50

Störungscode #W00

Ursach:

Blinking Screen – Press “Reset” key to view this message

Outdoor Sensor Open

LÖsung:

- Check to see if the Outdoor Sensor is connected.
- Check wiring connectons to outdoor sensor.
- Remove wires from terminals #3 and #4 on the boiler and check the resistance between them. If the reading shows an open circuit there is an open circuit.