Störungen / Fehler

• - wähle Typ -
• Elite EL-110
• Elite EL-150
• Elite EL-220
• Elite EL-299
• Elite EL-301
• Elite EL-399
• Elite EL-80
• Elite Fire Tube Combi (floor Mount)
• Elite Fire Tube Combi (wall Mount) EFTC-140W
• Elite FT EFT-110
• Elite FT EFT-155
• Elite FT EFT-199
• Elite FT EFT-285
• Elite FT EFT-399
• Elite FT EFT-55
• Elite FT EFT-80
• Elite Premier EP-110
• Elite Premier EP-150
• Elite Premier EP-220
• Elite Premier EP-299
• Elite Premier EP-301
• Elite premier EP-399
• Elite Premier EP-80
• Enduro TI ETI-1000
• Enduro TI ETI-750
• Hydra Smart RT-199
• Hydra Smart RTC-199
• Mod con 1000
• Mod con 1700
• Mod con 300
• Mod con 500
• Mod Con 500 After december 2012
• Mod con 850
• Mod Con 850 After december 2012
• Phoenix PH-76-50
• Phoenix PH-76-60
• Phoenix PH-76-80
• Phoenix PH100
• Phoenix PH100-119
• Phoenix PH100-55
• Phoenix PH100-80
• Phoenix PH130
• Phoenix PH130-119
• Phoenix PH130-55
• Phoenix PH130-55SA
• Phoenix PH130-80
• Phoenix PH160
• Phoenix PH160-119
• Phoenix PH160-55
• Phoenix PH160-80
• Phoenix PH199
• Phoenix PH199-119
• Phoenix PH199-55
• Phoenix PH199-55SA
• Phoenix PH199-80
• Phoenix PHM130-100
• Phoenix PHM130-80
• Phoenix PHM199-100
• Phoenix PHM199-80
• Pionier PHR 130-55C
• Pionier PHR 160-55C
• Pionier PHR 199-55C
• Pionier PHR100-55
• Pionier PHR130-55
• Pionier PHR160-55
• Pionier PHR199-55
• UFT-100W
• UFT-120W
• UFT-140W
• UFT-80W

• - wähle Code -
• E03
• E19
• F00
• F01
• F02
• F03
• F05
• F06
• F09
• F10
• F11
• F13
• F20
• F31
• FL
• FLU
• FOU
• LEO
• LOU
• pp

Kessel Typ Mod con 500

Störungscode FLU

Ursach:

Blocked Vent Pressure Switch

LÖsung:

- Check the flue vent to be sure it is not blocked or damaged.
- Check the switch wiring by applying a jumper in place of the switch. If the code clears with the jumper in place, REPLACE the flue switch and connect the wires to the new switch BEFORE running the boiler.

WARNING: Do not use jumper to remedy this error. Faulty switches MUST be replaced. Failure to do so could result in serious injury or death.